Plywood Panels for One Series used in situations to mold the walls inside an elevator shaft.

Sold per plywood panel @ 1.11 m² each piece. See attachments for dimension details and visit http://www.nudura.com/training/installation-videos for full installation details and videos.

Snap shot useful info

• Weight per package: 6.8 kg
• Area per piece: 1.11 m²
• Dimensions per package: 2.44m x 0.46m x 0.03m
• Pieces in a 40'HC: 2137

Volume (m³) of concrete required per piece. (Check with your engineer for the grade of concrete required for your project.)

• Core Size 100 mm: = 0.120 m³
• Core Size 150 mm: = 0.177 m³
• Core Size 200 mm: = 0.234 m³
• Core Size 250 mm: = 0.290 m³
• Core Size 300 mm: = 0.347 m³

To assemble a SINGLE One Series Form Unit you will require the following components:

FOR A Standard One Series Form;

• STANDARD
• 1 x Standard EPS Panel
• 1 x Plywood Panel
• 24 x Screws
• 12 x DURA MULTI-LINK Ties
• 12 x Insert Webs
• 1 x Jig

Reinforcement required

• NUDURA have developed reinforcement tables based on European and North American code you can refer to these as guidance but always comply with your local code.